China Harmonic Drive Gearbox Actuator for Dental Equipment with high quality

Product Description

Solution Description:

one. Flexspline is a hollow flanging normal cylinder structure.

two. There is a large-diameter hollow shaft gap in the middle of the cam of the wave generator. The inside style of the reducer has a assist bearing.

three. It has a fully sealed construction and is effortless to put in. It is very appropriate for situations in which the wire requirements to be threaded from the centre of the reducer.

Positive aspects:
1. Higher precision,high torque
two. Dedicated technical personnel can be on-the-go to provide design and style remedies
three. Factory direct product sales good workmanship durable quality assurance
4. Merchandise quality concerns have a 1-12 months warranty time, can be returned for substitution or restore

Organization profile:

HangZhou CZPT Technological innovation Co., Ltd. established in 2014, is fully commited to the R & D plant of high-precision transmission parts. At existing, the annual production ability can attain 45000 sets of harmonic reducers. We firmly feel in top quality 1st. All backlinks from raw resources to finished goods are strictly supervised and managed, which provides a sound foundation for solution top quality. Our goods are sold all more than the nation and abroad.

The harmonic reducer and other high-precision transmission elements were independently created by the firm. Our organization spends twenty% of its income every single year on the analysis and improvement of new technologies in the sector. There are 5 folks in R & D.

Our edge is as under:

one.7 many years of advertising experience

2. 5-man or woman R & D team to give you with technological help

three. It is marketed at house and overseas and exported to Turkey and Eire

four. The merchandise quality is assured with a one-calendar year warranty

five. Items can be tailored

Energy manufacturing unit:

Our plant has an entire campus The variety of workshops is about three hundred Whether or not it truly is from the generation of raw supplies and the procurement of raw supplies to the inspection of finished goods, we are performing it ourselves. There is a comprehensive manufacturing program

HST-III Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at begin end		The allowable optimum of the regular load torque		Maximum torque is allowed in an quick		Allow the optimum speed to be entered	Typical input speed is allowed	Again gap	design existence
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	six.2	.six	20.7	two.one	seven.nine	.seven	40.three	four.1	7000	3000	≤30	10000
	80	nine	.nine	27	two.seven	12.seven	one.3	fifty four.1	five.five
	a hundred	9	.9	32	3.three	12.7	one.three	62.1	six.3
17	50	18.four	1.9	39	4	29.9	three	eighty.5	eight.2	6500	3000	≤30	15000
	80	twenty five.three	two.six	49.five	five	31	3.2	one hundred.one	10.2
	a hundred	27.six	2.eight	62	six.three	45	four.six	124.2	12.seven
20	fifty	28.8	2.nine	64.4	six.six	39	4	112.seven	eleven.five	5600	3000	≤30	15000
	eighty	39.1	4	85	eight.8	fifty four	five.five	146.one	14.nine
	100	46	four.7	94.3	nine.six	fifty six	five.8	169.one	seventeen.2
	a hundred and twenty	forty six	four.7	100	ten.2	fifty six	5.eight	169.1	seventeen.two
	one hundred sixty	forty six	4.7	100	10.two	56	five.8	169.1	seventeen.2
25	fifty	44.9	4.six	113	eleven.5	63	six.five	213.nine	21.eight	4800	3000	≤30	15000
	eighty	seventy two.five	seven.4	158	sixteen.1	100	10.two	293.three	29.9
	100	77.1	7.9	181	eighteen.four	124	12.7	326.6	33.three
	120	seventy seven.one	7.9	192	19.six	124	12.7	349.6	35.six
32	50	87.4	eight.9	248	25.three	124	twelve.seven	439	44.8	4000	3000	≤30	15000
	80	135.7	thirteen.8	350	35.six	192	19.6	653	sixty six.6
	100	157.6	16.one	383	39.one	248	25.three	744	seventy five.9
40	a hundred	308	37.2	660	sixty seven	432	forty four	1232	126.seven	4000	3000	≤30	15000

HSG Parameter:

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed CZPT torque at start off stop		The allowable highest of the common load torque		Maximum torque is allowed in an quick		Let the highest pace to be entered	Typical enter pace is authorized	Back gap	design and style life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	.seven	23	two.3	nine	.9	46	four.seven	14000	8500	≤20	15000
	eighty	10	1	thirty	three.1	fourteen	1.4	61	6.two
	100	ten	one	36	3.seven	14	1.4	70	seven.two
17	fifty	21	2.one	forty four	four.five	34	three.4	ninety one	nine	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.six	113	twelve
	one hundred	31	three.two	70	seven.2	51	5.two	143	fifteen
20	50	33	3.3	73	seven.4	forty four	four.5	127	thirteen	10000	6500	≤20	20000
	80	44	four.5	96	9.eight	sixty one	six.2	one hundred sixty five	seventeen
	100	fifty two	five.three	107	ten.nine	sixty four	6.five	191	20
	120	52	5.three	113	11.5	64	6.5	191	20
	one hundred sixty	fifty two	5.3	one hundred twenty	twelve.two	sixty four	six.five	191	20
25	50	51	five.2	127	13	seventy two	seven.three	242	twenty five	7500	5600	≤20	20000
	80	eighty two	eight.4	178	eighteen	113	12	332	34
	one hundred	87	8.nine	204	21	140	14	369	38
	one hundred twenty	87	8.9	217	22	140	14	395	forty
32	fifty	ninety nine	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	forty	217	22	738	75
	100	178	eighteen	433	44	281	29	841	86
40	a hundred	345	35	738	75	484	forty nine	1400	143	5600	4000	≤20	20000

Exhibitions:
Software scenario:

FQA:
Q: What need to I give when I decide on a gearbox/pace reducer?
A: The ideal way is to provide the motor drawing with parameters. Our engineer will verify and suggest the most suited gearbox model for your reference.
Or you can also offer the under specification as properly:
1) Kind, product, and torque.
2) Ratio or output velocity
3) Working issue and relationship strategy
four) Good quality and mounted device title
five) Enter method and enter speed
six) Motor manufacturer design or flange and motor shaft size

US $290-500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-I
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

US $290-500
/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Agricultural Machinery, Hst-I
Hardness:	Hardened Tooth Surface
Installation:	90 Degree
Layout:	Coaxial
Gear Shape:	Cylindrical Gear
Step:	Single-Step

###

Samples:	US$ 100/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \| Customized Request

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	6.2	0.6	20.7	2.1	7.9	0.7	40.3	4.1	7000	3000	≤30	10000
	80	9	0.9	27	2.7	12.7	1.3	54.1	5.5
	100	9	0.9	32	3.3	12.7	1.3	62.1	6.3
17	50	18.4	1.9	39	4	29.9	3	80.5	8.2	6500	3000	≤30	15000
	80	25.3	2.6	49.5	5	31	3.2	100.1	10.2
	100	27.6	2.8	62	6.3	45	4.6	124.2	12.7
20	50	28.8	2.9	64.4	6.6	39	4	112.7	11.5	5600	3000	≤30	15000
	80	39.1	4	85	8.8	54	5.5	146.1	14.9
	100	46	4.7	94.3	9.6	56	5.8	169.1	17.2
	120	46	4.7	100	10.2	56	5.8	169.1	17.2
	160	46	4.7	100	10.2	56	5.8	169.1	17.2
25	50	44.9	4.6	113	11.5	63	6.5	213.9	21.8	4800	3000	≤30	15000
	80	72.5	7.4	158	16.1	100	10.2	293.3	29.9
	100	77.1	7.9	181	18.4	124	12.7	326.6	33.3
	120	77.1	7.9	192	19.6	124	12.7	349.6	35.6
32	50	87.4	8.9	248	25.3	124	12.7	439	44.8	4000	3000	≤30	15000
	80	135.7	13.8	350	35.6	192	19.6	653	66.6
	100	157.6	16.1	383	39.1	248	25.3	744	75.9
40	100	308	37.2	660	67	432	44	1232	126.7	4000	3000	≤30	15000

###

Model	Speed ratio	Enter the rated torque at 2000r/min		Allowed peak torque at start stop		The allowable maximum of the average load torque		Maximum torque is allowed in an instant		Allow the maximum speed to be entered	Average input speed is allowed	Back gap	design life
Model	Speed ratio	NM	kgfm	NM	kgfm	NM	kgfm	NM	kgfm	r / min	r / min	Arc sec	Hour
14	50	7	0.7	23	2.3	9	0.9	46	4.7	14000	8500	≤20	15000
	80	10	1	30	3.1	14	1.4	61	6.2
	100	10	1	36	3.7	14	1.4	70	7.2
17	50	21	2.1	44	4.5	34	3.4	91	9	10000	7300	≤20	20000
	80	29	2.9	56	5.7	35	3.6	113	12
	100	31	3.2	70	7.2	51	5.2	143	15
20	50	33	3.3	73	7.4	44	4.5	127	13	10000	6500	≤20	20000
	80	44	4.5	96	9.8	61	6.2	165	17
	100	52	5.3	107	10.9	64	6.5	191	20
	120	52	5.3	113	11.5	64	6.5	191	20
	160	52	5.3	120	12.2	64	6.5	191	20
25	50	51	5.2	127	13	72	7.3	242	25	7500	5600	≤20	20000
	80	82	8.4	178	18	113	12	332	34
	100	87	8.9	204	21	140	14	369	38
	120	87	8.9	217	22	140	14	395	40
32	50	99	10	281	29	140	14	497	51	7000	4800	≤20	20000
	80	153	16	395	40	217	22	738	75
	100	178	18	433	44	281	29	841	86
40	100	345	35	738	75	484	49	1400	143	5600	4000	≤20	20000

Types of Vehicle Gearboxes

In a vehicle, there are many types of gearboxes available. There are planetary gearboxes, Coaxial helical gearboxes, and skew bevel helical gearboxes, among others. In this article, we’ll cover all of them and help you determine which type of gearbox would be right for your vehicle. Also, we’ll discuss how each differs from the others.
gearbox

planetary gearbox

A planetary gearbox is composed of three main components: a sun gear, an input bevel gear, and an output shaft. A planetary gearbox can have different output torques and ratios. The basic model of a planetary gearbox is highly efficient and transmits 97% of the power input. There are several kinds of planetary gearboxes, depending on the type of operation. In general, there are three types: the simple, the intermediate, and the complex.
The price of a planetary gearbox can vary a lot, and it’s important to know what you’ll need. Different manufacturers produce different planetary gearboxes, so check with a manufacturer to see what they have available. Make sure to check the quality of the planetary gearbox before making a final purchase. In addition, be sure to compare the prices and the availability of a particular product. A quality planetary gearbox will provide years of trouble-free operation and will not break your bank.
Planetary gears feature an integer number of teeth. Each planet has teeth that must mesh with its ring or sun. The number of planets, ring, and tooth count of each gear determine whether the teeth mesh. Some planets have fewer teeth than others, so they mesh better than others. However, compound planets can be more flexible and achieve higher reduction ratios. If you’re looking for a planetary gearbox for your next project, consider getting in touch with a manufacturer who specializes in this technology.
When it comes to construction, a planetary gearbox is no exception. It’s extremely important to choose the right planetary gear for your application, because an imbalance in the planet gear can cause increased wear and failure. Moreover, the compact size of a planetary gear ensures maximum heat dissipation. However, a planetary gear box may require cooling in some applications. A planetary gearbox will make your life easier, and it will give you years of trouble-free operation.

Straight bevel helical gearbox

The Straight bevel helical gearbox has a number of advantages, but it has a relatively short manufacturing process. Its most popular application is in the automotive industry, where it is used in many types of vehicles. Other applications include heavy and light equipment and the aviation and marine industries. Below is a brief introduction to this gearbox type. Read on to learn about its benefits. This type of gearbox is one of the easiest to manufacture.
The spiral bevel gear has larger teeth than straight bevel gears, resulting in a smoother, quieter rotation. It can handle high-speed heavy loads with less vibration. Spiral bevel gears are classified by their tooth form and cutting method. Straight bevel gears are easier to design and manufacture, but spiral bevel gears are more expensive. Both designs are suitable for high-speed, heavy-load operations, and general manufacturing applications.
In addition to being easy to install, the modular bevel gears have many advantages. They have an exceptionally high degree of interchangeability and feature the highest standards of component integrity. They can also be tailored to meet your specific requirements. The advantages of this gearbox type include high precision, optimum performance, and low noise. And because they are modular, they can be produced in a variety of finishes. These include stainless steel, titanium, and bronze.
Straight bevel helical gearbox manufacturers are committed to a high degree of precision in their designs. The radii, torques, and tooth profiles of straight bevel gears are more precisely measured than those of cylindrical bevel gears. The same calculations are used for all traditional bevel gear generators. This ensures that your 5-axis milled bevel gear sets have the same calculations and layout.
gearbox

Coaxial helical gearbox

The Coaxial helical gearbox is a highly efficient transmission system that is well suited for light-duty applications. Compared to spur-type gearboxes, the real pitch of a Coaxial helical gearbox is low at all helix angles. This is because the coaxial type has the same number of teeth and center gap as the spur gearbox. Coaxial helical gearboxes also have a smaller footprint and are compact.
Several nations have implemented lockdown regulations for Industrial Gearbox trade, threatening the global economy. Several factors have been implicated in COVID-19, including supply chain, market, and financial markets. Experts are monitoring the situation globally and project remunerative prospects for gearbox manufacturers after the crisis. This report depicts the latest scenario and offers a comprehensive analysis of COVID-19’s impact on the entire industry.
This Coaxial helical gearbox features a compact structure and high precision gear. Its three-stage design combines two-stage gears with a single-stage gear, forging high-quality alloy steel for high precision and durability. The gears are serially-designed for easy interchangeability. They are also available in high-frequency heat-treated steel. A Coaxial helical gearbox is the perfect solution for many applications.
Coaxial helical gearboxes have the added benefit of using cylindrical gears instead of shafts. They operate quietly, and have more surface area to interact with. Their fixed angles make them suitable for heavy-duty applications, like in conveyors, coolers, and grinders. Compared to other gearbox types, Helical gearboxes have higher power-carrying capacity. Listed below are the benefits of a Coaxial Helical Gearbox

Skew bevel helical gearbox

A Skew bevel helical gear box is a common type of industrial gearbox. These gearboxes are rigid and compact and can be used in a variety of applications. They are commonly used in heavy-duty applications such as grinding mills, conveyors, and coolers. They are used in many applications to provide rotary motions between non-parallel shafts. They also have the added benefit of high-efficiency in a variety of industries.
Skew bevel helical gear boxes are suitable for heavy loads and are monolithic in construction. This type of gearbox combines the benefits of bevel and helical gears for right-angle torque, which makes it a popular choice for heavy-duty applications. In addition to being a robust and reliable gearbox, these gearboxes are highly customizable and can meet almost any industrial need.
To maximize the efficiency of bevel gears, FE-based tooth contact analysis is used to develop a sophisticated geometry optimization algorithm. The software also allows users to define optimal flank topography by introducing application-specific weightings for specific load levels. With this data, a manufacturing simulation is conducted to determine the best variant. A robust variant combines the benefits of efficiency, load-carrying capacity, and low excitation behavior.
The helical gear can be angled at 90 degrees. This is similar to a spur gear but produces less noise. It can achieve a nine-to-one speed reduction with one stage. However, a helical gear requires a larger driver gear for higher reductions. This gearbox is suitable for speeds from 1:1 to three times. They are often used in the manufacture of motors and generators.
gearbox

Extruder helical gearbox

An extruder helical gearbox is one of the most common industrial gears. It is compact in size and low-power consuming, making it ideal for heavy-duty applications. Extruder helical gearboxes are suitable for a variety of industrial applications, including cement, plastics, rubber, conveyors, and coolers. In addition to its use in plastics and rubber manufacturing, this gearbox is also useful in other low-power applications such as crushers, coolers, and conveyors.
CZPT SG series Extruder Helical Gearboxes are available in Single Screw and Twin Screw Variations. These gears feature a compact design, high power density, and long service life. Axial bearing housing and thrust bearings are mounted on the input shafts. Extruder helical gearboxes can be installed in various positions, including horizontal, vertical, and inclined.
Helicoidal gears are often produced in a modular manner. This design provides multiple benefits, including engineering and performance advantages, modular production, and the highest level of component integrity. A single helical gearbox can be assembled into a larger gearbox if needed, but modular production ensures consistent performance and economy. This modular design is also cost-effective. It is a versatile and reliable solution for a wide range of applications.
In addition to its efficiencies, Extruder helical gearboxes also have a low noise profile. They have no squeal sounds, and they are silent when running. They can transfer more power than conventional gearboxes. This type of gear has been used in the manufacturing of high-quality plastic products for years. They are often used for applications in automotive transmissions. Aside from being quiet, helical gears have higher contact levels and lower vibration.

China Harmonic Drive Gearbox Actuator for Dental Equipment with high quality
editor by czh 2023-01-31

gearedmotors

[email protected]