China Ray Earth Hole Drilling Machine Drill Earth Gearbox for Earth Auger gearbox adjustment

Item Description

RAY Earth gap drilling equipment drill earth gearbox for earth auger 

Application Area:Tree planting, Pole and Mast Installations, Landscaping, Properly dull, Basis piles, Screw pile installations, Ground resource warmth pumps and so on.

Pin Hitch:

(1) Single pin hitch is the most simple and lower cost one.

(2) Double pin hitch has double lock and can accurate positioning.

(3) Double pin cradle hitch is the most protection a single, which can keep the earth auger vertical to the ground when it operated

Auger Drive:

Auger Generate is the heart of earth auger. We adopt imported motor to ensure its top quality. It is divided into 2 key components, Motor and gear. The motor from American Eaton, manufacturer quality assurance. And we make sure the top quality of the auger travel of eighteen months guarantee.

1.Forged hoods ears: Deal with the weighty pressure of every day use.Make contact with surface area wider and safer.

two.CZPT Motor: Developing the most reliable attachments .

three.ERICYLIC gearbox: Unique planetary gearbox.Multiplied output torque.

Intense performance

four.NON-dislodgement shaft: Assembled leading down locked into earth drill property.By no means fall out.Offered a safer environment.

Pay interestWe have independently developed a tungsten tooth and have a patent (patent no:.4) .

Hoses:

Hoses is decided based on the tonnage of the excavator.

Auger Drill:

1,Auger drill can be flexibly picked, S4, S5, S6,PA,four types are offered.

two,Auger drill have distinct lengths of extension rods and the duration of the auger drill can be set in accordance to customer requirements (measurement within a particular selection).

three,Rock auger drill: It match to rock, pitch or a great deal of gravel land.

Tungsten auger drill: It match to clay, snady land or a small gravel. CZPT the soil land really simply.

Sharp auger drill: It suit to rock,  concrete, cement, asphalt and so on.

Specification:

Model Oil Folw Max Torque Pressure Rotary Pace Provider Oil Hose Drill Dia.
gal./min l/min Lbf·Ft N·M Psi Bar Rpm T Inch mm
REA2000 6-14 23-fifty three 2537 1871 3000 205 40-92 one-2.5 one/2 one hundred-400
REA2500 eight-sixteen 30-61 3297 2432 3000 205 40-82 one.5-3 1/2 one hundred-five hundred
REA3000 8-sixteen thirty-61 3900 2877 3500 240 forty-81 two-3.5 1/2 one hundred-600
REA3500 eight-eighteen 30-sixty eight 4900 3614 3500 240 32-72 2.5-45 1/two a hundred-750
REA4500 10-twenty 38-seventy six 5719 4218 3500 240 32-sixty four 3-5 one/2 one hundred-900
REA5000 ten-twenty 38-seventy six 6855 5056 3500 240 29-58 4.5-7 1/two 150-600
REA5500 12-22 45-83 8012 5910 3500 240 28-50 5-seven one/two one hundred fifty-750
REA6000 twelve-28 45-106 8338 6150 3500 240 34-eighty 6-eight three/4 150-900
REA7000 sixteen-32 sixty one-121 9397 6931 3500 240 37-seventy two 7-ten 3/4 one hundred fifty-900
REA8000 sixteen-36 sixty one-136 1571 8048 3500 240 29-sixty four 8-twelve 3/four a hundred and fifty-900
REA10000 eighteen-36 70-136 14612 1571 3500 240 26-forty five 10-thirteen 3/four a hundred and fifty-900
REA12000 21-37 80-a hundred and forty 16236 11976 3500 240 22-forty three 13-seventeen 1 150-900
REA15000 21-forty 80-151 20399 15046 3500 240 20-39 thirteen-seventeen one a hundred and fifty-1200
REA20000 21-forty five 80-170 25812 19039 3500 240 17-34 thirteen-twenty 1 one hundred fifty-1200
REA25000 24-forty eight 90-one hundred eighty 33825 24949 3500 240 sixteen-30 15-23 1 one hundred fifty-1200
REA50000 26-seventy four one hundred-280 68052 50195 4000 280 eleven-30 21-50 1 300-2400

Aslo, these specifics just support you know our merchandise swiftly. Make sure you come to feel free of charge to contact with me ,that is my responsibility and honor to support you uncover the proper item.

Packaging details:Cartons and picket packing containers.

Shipping time: transported in 7 days following payment.

If you want to promote your own brand, We can also provide OEM service .(custom your own brand, color, shape and so on you requested) 

HangZhou CZPT International Co., Ltd is a professional company which was discovered in 2002 has a great deal of encounter in development equipment attachments producing and serving.Our manufacturing unit is found in HangZhou Town, ZheJiang Province, Close to to ZheJiang City. Which has big capability to make different varieties items like hydraulic breaker, earth auger, swift hitch, Vibro ripper,pile breaker and other design machinery attachments.We are always studying to boost our products’ efficiency and innovate developing to fulfill much more and more clients’ needs.

FAQ

Q: Are you a producer?

A: Sure,our manufacturing unit was proven in 2002 and we have our very own investing organization.

 

Q: Are you confident your merchandise will match my excavator?

A: Yes, we are expert about this, you can also tell me your excavator design, and we will check it for you.

 

Q: Can you give customers’ design?

A: Positive, we can give OEM and ODM provider.

 

Q: What is the MOQ and payment terms?

A: MOQ is 1set. Payment by means of T/T,L/C, Western Union accepted, other conditions can be negotiated.

 

Q: How about delivery time?

A: 5-twenty five operate times soon after the payment, count on your amount.

 

Q: How about the package deal?

A: Our earth auger packed by polywood scenario.

 

Q: Which place have you exported?

A: Vietnam, Saudi Arabia, America, Thailand, New Zealand, Canada, Australia, Peru, Chile, Brazil, Mexico, Iran, South Africa, and many others.

Type: Hydraulic Earth Auger
Application: Excavator
Certification: CE, ISO9001: 2000
Condition: New
Name: Earth Auger
Power: Hydraulic

###

Customization:

###

Model Oil Folw Max Torque Pressure Rotary Speed Carrier Oil Hose Drill Dia.
gal./min l/min Lbf·Ft N·M Psi Bar Rpm T Inch mm
REA2000 6-14 23-53 2537 1871 3000 205 40-92 1-2.5 1/2 100-400
REA2500 8-16 30-61 3297 2432 3000 205 40-82 1.5-3 1/2 100-500
REA3000 8-16 30-61 3900 2877 3500 240 40-81 2-3.5 1/2 100-600
REA3500 8-18 30-68 4900 3614 3500 240 32-72 2.5-45 1/2 100-750
REA4500 10-20 38-76 5719 4218 3500 240 32-64 3-5 1/2 100-900
REA5000 10-20 38-76 6855 5056 3500 240 29-58 4.5-7 1/2 150-600
REA5500 12-22 45-83 8012 5910 3500 240 28-50 5-7 1/2 150-750
REA6000 12-28 45-106 8338 6150 3500 240 34-80 6-8 3/4 150-900
REA7000 16-32 61-121 9397 6931 3500 240 37-72 7-10 3/4 150-900
REA8000 16-36 61-136 10911 8048 3500 240 29-64 8-12 3/4 150-900
REA10000 18-36 70-136 14612 10778 3500 240 26-45 10-13 3/4 150-900
REA12000 21-37 80-140 16236 11976 3500 240 22-43 13-17 1 150-900
REA15000 21-40 80-151 20399 15046 3500 240 20-39 13-17 1 150-1200
REA20000 21-45 80-170 25812 19039 3500 240 17-34 13-20 1 150-1200
REA25000 24-48 90-180 33825 24949 3500 240 16-30 15-23 1 150-1200
REA50000 26-74 100-280 68052 50195 4000 280 11-30 21-50 1 300-2400
Type: Hydraulic Earth Auger
Application: Excavator
Certification: CE, ISO9001: 2000
Condition: New
Name: Earth Auger
Power: Hydraulic

###

Customization:

###

Model Oil Folw Max Torque Pressure Rotary Speed Carrier Oil Hose Drill Dia.
gal./min l/min Lbf·Ft N·M Psi Bar Rpm T Inch mm
REA2000 6-14 23-53 2537 1871 3000 205 40-92 1-2.5 1/2 100-400
REA2500 8-16 30-61 3297 2432 3000 205 40-82 1.5-3 1/2 100-500
REA3000 8-16 30-61 3900 2877 3500 240 40-81 2-3.5 1/2 100-600
REA3500 8-18 30-68 4900 3614 3500 240 32-72 2.5-45 1/2 100-750
REA4500 10-20 38-76 5719 4218 3500 240 32-64 3-5 1/2 100-900
REA5000 10-20 38-76 6855 5056 3500 240 29-58 4.5-7 1/2 150-600
REA5500 12-22 45-83 8012 5910 3500 240 28-50 5-7 1/2 150-750
REA6000 12-28 45-106 8338 6150 3500 240 34-80 6-8 3/4 150-900
REA7000 16-32 61-121 9397 6931 3500 240 37-72 7-10 3/4 150-900
REA8000 16-36 61-136 10911 8048 3500 240 29-64 8-12 3/4 150-900
REA10000 18-36 70-136 14612 10778 3500 240 26-45 10-13 3/4 150-900
REA12000 21-37 80-140 16236 11976 3500 240 22-43 13-17 1 150-900
REA15000 21-40 80-151 20399 15046 3500 240 20-39 13-17 1 150-1200
REA20000 21-45 80-170 25812 19039 3500 240 17-34 13-20 1 150-1200
REA25000 24-48 90-180 33825 24949 3500 240 16-30 15-23 1 150-1200
REA50000 26-74 100-280 68052 50195 4000 280 11-30 21-50 1 300-2400

What Is a Gearbox?

A gearbox is the mechanical system of an automobile that allows a vehicle to change gear smoothly. This arrangement of gears is highly complex, which helps to provide a smooth gear change. In this article, we will explore some of the different types of gearboxes, including the Epicyclic gearbox, the Coaxial helical gearbox, and the Extruder helical gearing. These are three of the most common types of gearboxes used in automobiles.
gearbox

Gearboxes

Gearboxes help drivers choose the appropriate gear for the conditions. A lower gear produces the least speed, while a higher gear gives the maximum torque. The number of gears used in a gearbox varies to meet different demands on the road and load. Short gearing provides maximum torque, while tall gearing offers higher top speeds. These features combine to improve the driveability of a vehicle. But what is a gearbox?
The gearbox has a slew of components, including the bearings and seals. Among these components is the gearbox, which is subjected to wear and tear due to metal-to-metal contact. As a result, gearboxes require close monitoring. Various tests are used to assess the condition of gears, such as corrosion and wear. Proactive tests emphasize wear, contamination, and oil condition. However, there are also proactive tests, such as the ferrous density test and the AN test, which monitor additive depletion and abnormal wear.
The separating force is a key factor for the design of a gearbox. The primary radial measurement point should be oriented to monitor normal forces. The secondary measurement point should be located in the opposite direction of rotation from the primary radial measurement point. The separating force generated by a helical gear set is called tangential force. The primary and secondary radial measurement points should be positioned so as to provide information about both normal and tangential forces.
Manual gearboxes are often manual. The driver can control the synchromesh by using a selector rod. This rod moves the synchromesh to engage the gear. Reverse gears are not synchromesh because they are used only when the vehicle is at a standstill. In older cars, the first gear often lacked synchromesh due to cost or lack of torque. Drivers could still use first gear with a double-declutch.

Coaxial helical gearbox

The R series rigid tooth flank helical gearbox features high versatility and good combination. They have a wide range of motor power and allow for fine classification of transmission ratios. The R series gearbox has several advantages, including high efficiency, long service life, and low vibration. This series of gearbox can be combined with a wide range of reducers and variators. Its size and high performance makes it an ideal choice for applications that require maximum torque and load transfer.
The main feature of a helical gearbox is that it presents a fixed velocity ratio, even if the center gaps are not perfectly set. This is sometimes referred to as the fundamental rule of gearing. A helical gearbox is similar to paper spur gears in terms of radial pitch, since the shafts in the helical gearbox cross at an angle. The center gap of a helical gearbox is the same for both the left and right-handed counterparts.
The EP Series is another popular model of a Coaxial helical gearbox. This series has high torque and a maximum reduction ratio of 25.6:1. It is an ideal choice for the plastic industry, and CZPT offers an extensive range of models. Their center distance ranges from 112 mm to 450 mm. The EP Series has several models with different center distances. In addition to high torque and efficiency, this gearbox has low noise and vibration, and it is easy to assemble and disassemble.
Another type of Coaxial helical gearboxes is the planetary gearbox. They have a high efficiency and power density. Unlike coaxial helical gearboxes, planetary gearboxes have an axis on the same direction as the output shaft. They are easy to integrate into existing drive trains. In addition, they are compact and easy to integrate with existing drive trains. For servo applications, they are another great choice.
gearbox

Epicyclic gearbox

An epicyclic gearbox is a type of automatic gearbox used to drive cars. Its primary advantage is its compact design, and it is more reliable and efficient than manual gearboxes. It is comprised of a sun gear and two planetary gears, encased in a ring gear called the Annulus. This system is useful for drivers who need to shift gears frequently, as they will become tired if the gears are suddenly changed.
An epicyclic gearbox consists of three different types of gears: ring gear, sun gear, and annular ring gear. The ring gear is the outermost gear and has angular-cut teeth on its inner surface. It is used in conjunction with planetary gears to provide high-speed ratios to vehicles. The sun gear also reverses the direction of the output shaft. This helps reduce transmission error.
An epicyclic gearbox uses multiple planets to transfer power between the planets. This type of gearbox is lightweight and features a high power density. This gearbox has several benefits over a standard single-stage parallel axis gearbox, including multiple load paths, unequal load sharing, and phased meshing. Furthermore, epicyclic gearboxes require more complex transmission error optimisation than their counterparts, including more than one stage.
The objective of epicyclic gearbox research is to provide the lowest transmission error possible. The process includes an initial design and detailed specification. The system is defined by its load spectrum and required ratio. Deflections of the elastic mesh are calculated to understand their strength and how much energy the system can handle. Finally, micro-geometric corrections minimize transmission error. These improvements are crucial to the overall efficiency of an epicyclic gearbox.

Extruder helical gearing

The helix in an extruder helical gearing is fixed at an angle, enabling more interaction with the shaft in the same direction as it moves. As a result, the shaft and the bearing are in constant contact for a long period of time. Typically, extruder helical gearing is used in applications where there is low excitement, such as steel, rolling mills, conveyors, and the oil industry. The bevel gear train also plays a role in these applications.
The CZPT AEX extruder drive gear is specifically developed for this specific application. The gears are compact and lightweight and offer exceptional power density and a long service life. These extruder gears are highly reliable, and they can be used in a wide range of applications, including rubber processing, food production, and recycling plants. CZPT offers both standard and custom gearing for your extruder.
Another advantage of helical gearing is its versatility. Since the helical gearing teeth are inclined at a specific angle, they can be adjusted to meet the specific needs of a given application. These gears also have the advantage of eliminating noise and shock from straight teeth. Unlike other gearing types, they are able to achieve a wide range of loads, from small to large. These helical gears are very durable and are the best option for high-load applications.
In addition to this, asymmetric helical gears have increased flexibility, while asymmetrical helical gears have lower flexural stiffness. The ratio of teeth to the shaft has a positive effect on the strength of the gear. Furthermore, asymmetrical helical gears are easier to manufacture. But before you purchase your next extruder gear, make sure you know what you’re getting into.
gearbox

1 speed gearbox

CZPT Group Components produces the one speed gearbox. It has the potential to make cars more efficient and environmentally friendly. The gear ratio of a car’s drivetrain is crucial for reaching maximum power and speed. Typically, a one-speed gearbox delivers a maximum of 200 hp. But the speed at which a car can reach this power must be high to get the full benefit from the electric motor. So, how can a one-speed gearbox improve the speed and torque of a car?
A one-speed gearbox is a mechanical device used to switch between second and third gears. It can include multiple gear sets, such as a shared middle gear for switching between second and third gears. It can also have an intermediate gear set that represents a switchable gear in both partial transmissions. The invention also includes a mechanism that makes it easier to change gears. The patent claims are detailed below. A typical one-speed gearbox may include two parts.
Generally, a one-speed gearbox will have up to seven forward gears, with each of these corresponding to a different speed. A one-speed gearbox can have five different gear sets and five different gear levels. It can have synchronized gear sets or last-shelf gear sets. In either case, the gears are arranged in a way that maximizes their efficiency. If the gears are placed on opposite sides of a car, the transmission may be a two-speed one.
CZPT Transmission specializes in the production of high-speed gearboxes. The company’s Milltronics HBM110XT gearbox machine is the perfect tool for this job. This machine has a large working table and a heavy-duty load capacity, making it a versatile option for many kinds of applications. There are also a wide variety of CZPT gearboxes for the automotive industry.

China Ray Earth Hole Drilling Machine Drill Earth Gearbox for Earth Auger     gearbox adjustment	China Ray Earth Hole Drilling Machine Drill Earth Gearbox for Earth Auger     gearbox adjustment
editor by czh 2023-01-23